Operate your own original Czech Micro Brewery

Technical parameters of Container cases for Microbrewery MOBBEER

Container cases MOBBEER – technical specifications

Microbreweries MOBBEER are installed in non-standard size containers 12.000 x  3.000 mm x 3.000 mm, or 6.000 mm x 3.000 mm x 2.500 mm. Alternatively we can also build a microbrewery in smaller sizes containers by individual customer requirements. Microbrewery MOBBEER consists of one or more containers.

 

Two-containers microbrewery MOBBEER - exterior 4Dimensions: 

I. Long version:

  • Length outer: 12000 mm, length inside: 11700 mm
  • Width outer: 3000 mm, width inside: 2700 mm
  • Height outer: 3000 mm, height inside: 2500 mm

II. Short version:

  • Length outer: 6000 mm, length inside: 5700 mm
  • Width outer: 3000 mm, width inside: 2700 mm
  • Height outer: 2500 mm, height inside: 2000 mm

Frame construction:  

  • Welded steel construction of hollow, edged and rolled profiles.

Two-containers microbrewery MOBBEER - exterior 3Ceiling :

  • circuit of edged profiles, partitions of edged profiles, reinforcement 40/20/2 mm.

Construction corners :

  • Containers reinforced corners 8 pcs.
  • Rainwater gutters in the front walls with two downspouts on each side of the inside of the corner uprights using PVC pipes ø 63 mm.

Surface and welding :

  • Frame is painted, surface finish of frame and sheath is zinc-phosphate paint by RAL color scale.
  • Construction is welded by DIN 18 800.

Two-containers microbrewery MOBBEER - exterior  2Floor :

  • circuit of G profile, partitions from profile IPE 80 mm, reinforcement 40/40/2 mm.
  • Bottom cover is galvanized sheet 0,63 mm, which is formed and attached to the floor frame with rivets.
  • Insulation 100 mm mineral wool by DIN 4108.
  • Vapor barrier PE 0,08 mm stretched lengthwise, K = 0,35 W/m2K. Loading capacity of floor 2000 N/m2.

Floor board:  

  • Chipboard tl. 22 mm screwed to the longitudinal steel girders.

Floor cover:

  • Stainless steel sheet tl. 2,0 mm laid in strips, glued with dispersion glue, joints welded.

Two-containers microbrewery MOBBEER - exterior 1Roof: 

  • Galvanized trapezoidal sheet 0,75 mm, wave depth 40 mm, attached with texi screws to the roof griders frame construction.
  • Insulation 80 mm PU by DIN 4108, non-flammable.
  • Vapor barrier PE 0,08 mm stretched lengthwise, K = 0,44 W/m2K.
  • We can fit any roof cover (for example, a gabled roof, roof tiles) according to customer requirements is possible

Ceiling :

  • Chipboard laminated on both sides tl. 10 mm attached to the ceiling with rivets with plastic cap.
  • Joints are designed with PVC H-profiles.

Ceiling cover :

  • Stainless steel sheet tl. 1,5 mm laid in strips, glued with dispersion glue, joints welded.

External walls:

  • Galvanized sheet 0,63 mm, wave depth 10 mm. 75 mm galvanized construction of galvanized profiles of Knauf.
  • Insulation 80 mm PU foam by DIN 4108.
  • Vapor barrier PE 0,08 mm stretched lengthwise, K = 0,56 W/m2K.

Inner lining of external walls:

  • Stainless steel sheet tl. 2,0 mm laid in strips, glued with dispersion glue, joints welded.
  • It is possible to make the outer lining of other materials according to customer requirements (wood, tile, plaster, straw, masking discoloration etc.).

Windows: 

  • 1 pc: white plastic window profile Kömmerling, 400 x 400mm, two wings with rubber seals. Left wing fixed, right wing hinged, plastic roller blind with manual control, white fitting Maco. insulating glazing 4/16/4, K = 1,1 W/m2K.
  • It is possible to add additional windows according to customer requirements or the configuration of the brewery.

Exterior doors: 

  • 1 pc: Steel door – one wing ZK 875 x 2000 mm, galvanized, smooth implementation of a steel frame with rubber seal. PVC door handle with label, cylinder lock.

Heating: 

  • 1 pc: Side wall electro-convector 2000 w with thermostat including outlet and separate circuit breaker.

Electrical wiring: 

(number of elements are valid for the long version of containers)

  • 1 pc: Switchboard with a rated residual device according for current microbrewery equipment and automatic circuit breakers built-in control unit box.
  • 10 pcs: Outlet  230V / 50Hz (or different by customer requirement)
  • 4   pcs: Outlet  3x400V / 50Hz (or different by customer requirement)
  • 3 pcs: Switcher with light.
  • 6 pcs: Light bulbs 1 x 36 W with opal diffuser including tubes 36 W/20.

Water inlet:

  • 1pc: DN 40, bottom inlet, accessible under the bottom cover from inside the container.

Disposal of waste water:

  • 1 pc DN 125, bottom outlet, accessible under the bottom cover from inside the container.

Beer piping (from serving tanks to the bar):

  • 1-4 pcs (according to the configuration of the brewery): DN 25, bottom outlet, accessible under the bottom cover from inside the container. Material 1.4301 (stainless steel).

Wort piping (from the brewhouse to fermentation tanks, if they are not placed in the same container):

  • DN 40, bottom or side outlet, accessible under the hood from inside the container. Material 1.4301 (stainless steel).

 


 

Back to the general informations about MOBBEER

If you enjoyed this post, please consider subscribing to the RSS feed to have future articles delivered to your feed reader.