Operate your own original Czech Micro Brewery

DMC

Brewhouse BREWORX MODULO Classic DMC

The brewhouse Breworx Modulo Classic DMC is a basic component of the modular microbrewery kit Breworx Modulo Classic which ensures the producton of beer by the traditional way from malt, hops, water and brewer’s yeast.

Brewhouse BREWORX MODULO Classic DMC (the same design for volumes 250 / 500 / 1000 litres)

Simple interior stainless steel brewhouse, allowing the production of wort by infusion or decoction method with manual control of the brewing process.
varna-breworx-modulo-500dmc

Type BREWORX MODULO Classic 250 DMC consists of two isolated vessels :

  • Mash-Wort kettle with direct electrical heating / with function “whilpooling” after removing an agitator
  • Lauter tun

Types BREWORX MODULO Classic 500 and 1000 DMC consist of three isolated vessel :

  • Mash-Wort kettle with direct electrical heating
  • Lauter tun
  • Whirlpool (separate vessel)

A plate exchanger for 1-st level of cooling is included in set. 2-nd level of cooling is ensured by wort cooling unit Modulo WCU or WCU-HWT).

Optionaly we offer the brewhouse without the plate exchanger or with the plate exchanger for 1-st and 2-nd level of cooling or with the shared plate exchanger for both levels of cooling of the wort.

Description of the control of the brewing process :

A brewer chooses required temperature on a control panel. It is read through thermodetector placed inside the wort kettle. The heating turns off after reaching the target temperature and turns on after cooling down of 2 degrees Celsius. The brewer monitors the time of the brewing process and time periods himself. The controlling and temperature sensing, heating controls, pumps and mixers with frequency inverters and lighting are on the front panel of the control electric panel, which is a part of the brewhouse, or can be optionally mounted separately (must be specified when ordering).

Brewhouse BREWORX MODULO Classic DMC as a part of the modular kit MODULO

A connection of the brewhouse BREWORX MODULO Classic DMC to other components of microbrewery MODULO is the same like brewhouse PMC. By default, the fermentation block of the microbrewery Modulo is connected to the brewhouse using special hoses, hose may optionally be replaced by a fixed pipe connection.
Scheme of microbrewery Breworx Modulo Classic PMC-DMC - basic assembly

Brewhouses Breworx Modulo Classic DMC – technical parameters and pricelist :

(PLEASE WAIT – loading of the pricelist may take a few seconds … )

 

 

 


 

 

For more information:

General informations about microbreweries MODULO … ?

Components of the modular microbreweries MODULO – description and prices …

Typical configurations of microbrewery sets MODULO – description and prices …

Catalogue of the modular microbreweries MODULO – to download & print …

 


If you enjoyed this post, please consider subscribing to the RSS feed to have future articles delivered to your feed reader.