SLC - Split flydende kølere
Køling af bryggeriet med vand / glykol køler a med den adskilte kondensator
Glycol-køleenheder Bruges i vores mikrobryggerier til duplikator køling af isolerede beholdere med to-jacketed konstruktion i lager kælder og de vigtigste fermentation fartøjer. Desuden anvendes glycol til afkøling af urten i anden fase i bryggerier med en 2-fasepladeveksler.
Fordele ved Split-væskekølere med en adskilt kondensator
En adskilt kondensator tillader sin placering uden for bygningen, hvilket øger køleeffektiviteten (opsamlet varme frigives til omgivelserne og indvendigt opvarmes ikke) og forhindrer overophedning af rum i et mikrobryggeri. Forudsætning for effektiv køling af kølevæsken er et korrekt talt kølesystem og udføres korrekt ved at forbinde alle dele af systemet.
Ulemper ved central køling af mikrobryggeri
Det er dog nødvendigt at ringe til det professionelle kølefirma til installation af kølesystemet, fordi systemet skal ekspert monteres på stedet. Normalt er det nødvendigt at bore nogle penetreringer til rør, monteringsbeslag til koldrør og suspensionskondenseringsenhed. Endelig skal du trykke kølesystemet med kølemiddel, hvilket ikke er muligt uden særligt udstyr. Det er nødvendigt at sikre periodisk vedligeholdelse med servicespecialisten for køleteknologi. I tilfælde af kølerens svigt lukkes hele kølesystemet til reparationer, hvilket medfører tab af driften af bryggeriet. Derfor er det tilrådeligt at udstyre bryggeriet med mindst to uafhængige kølesystemer, der er sikkerhedskopieret hinanden.
A good and inexpensive solution of described disadvantages is the backup of cooling by alternative cooling system, consisting of independent liquid cooling units with integrated condenser. This modular solution is used in our microbreweries BREWORX MODULO.
Tekniske parametre og prisliste for væskekølerne med separat kondensator:
Condensing unit assembly with a plate exchanger cooperates with a liquid coolant storage tank or independent cooling unit WCU or with independent cooling unit with heat water storage tank WCU-HWT.
Vi tilbyder disse split vand / glycol kølere:
- GCU-25 : Ekstern køleenhed 2.3-4.5 kW (til opdelte kølesystemer)
The cooling condenser unit intended for the cooling of the water (usually with glycol solution) in the industrial cooling water tank (ICWT - industrial cooling water tank is not included in this set and it must be purchased individually according to requirements of the customer). The iced water is then used to cooling of the beverage production tanks like fermenters or beer storage tanks and also to cooling other devices in the brewery. This equipment uses a special technical coolant intended to chilling systems that has to be filled and pressurized into the primary circuit only by qualified person. This… Læs mere " - GCU-40 : Ekstern køleenhed 5.6-10.9 kW (til opdelte kølesystemer)The cooling condenser unit intended for the cooling of the water (usually with glycol solution) in the industrial cooling water tank (ICWT - industrial cooling water tank is not included in this set and it must be purchased individually according to requirements of the customer). The iced water is then used to cooling of the beverage production tanks like fermenters or beer storage tanks and also to cooling other devices in the brewery. This equipment uses a special technical coolant intended to chilling systems that has to be filled and pressurized into the primary circuit only by qualified person. This… Læs mere "
- GCU-64 : Ekstern køleenhed 9.9-19.4 kW (til opdelte kølesystemer)The cooling condenser unit intended for the cooling of the water (usually with glycol solution) in the industrial cooling water tank (ICWT - industrial cooling water tank is not included in this set and it must be purchased individually according to requirements of the customer). The iced water is then used to cooling of the beverage production tanks like fermenters or beer storage tanks and also to cooling other devices in the brewery. This equipment uses a special technical coolant intended to chilling systems that has to be filled and pressurized into the primary circuit only by qualified person. This… Læs mere "
- GCU-80 : Ekstern køleenhed 11.9-23.3 kW (til opdelte kølesystemer)The cooling condenser unit intended for the cooling of the water (usually with glycol solution) in the industrial cooling water tank (ICWT - industrial cooling water tank is not included in this set and it must be purchased individually according to requirements of the customer). The iced water is then used to cooling of the beverage production tanks like fermenters or beer storage tanks and also to cooling other devices in the brewery. This equipment uses a special technical coolant intended to chilling systems that has to be filled and pressurized into the primary circuit only by qualified person. This… Læs mere "
- GCU-125 : Ekstern køleenhed 17.9-35.0 kW (til opdelte kølesystemer)The cooling condenser unit intended for the cooling of the water (usually with glycol solution) in the industrial cooling water tank (ICWT - industrial cooling water tank is not included in this set and it must be purchased individually according to requirements of the customer). The iced water is then used to cooling of the beverage production tanks like fermenters or beer storage tanks and also to cooling other devices in the brewery. This equipment uses a special technical coolant intended to chilling systems that has to be filled and pressurized into the primary circuit only by qualified person. This… Læs mere "
