SLC - Enfriadores de líquido divididos

Enfriamiento de la fábrica de cerveza mediante enfriador de agua / glicol con el condensador separado

 

Cervecerías de refrigeración líquidaUnidades refrigeradoras de glicol Se utilizan en nuestras microcervejas para el enfriamiento del duplicador de recipientes aislados con la construcción de dos chaquetas en el sótano de lager y los recipientes principales de la fermentación. Además, se utiliza glicol para enfriar el mosto en la segunda etapa en fábricas de cerveza con un intercambiador de placas de etapa 2.

Beneficios de los refrigeradores de líquido Split con un condensador separado

Un condensador separado permite su ubicación fuera del edificio, aumentando la eficiencia de refrigeración (el calor recogido es liberado al ambiente exterior y el interior no se calienta) e impide el sobrecalentamiento de las habitaciones en una microbratería. La condición previa para la circulación eficaz del refrigerante es un sistema de refrigeración correctamente contabilizado y realizado correctamente conectando todas las partes del sistema.

 

Desventajas de un enfriamiento central de la microbratería

Sin embargo, es necesario llamar a la empresa de refrigeración profesional para la instalación del sistema de refrigeración porque el sistema debe ser montado experto en el lugar. Por lo general, es necesario perforar algunas penetraciones para tuberías, soportes de montaje para tubos fríos y unidad de condensación de suspensión. Por último, es necesario presurizar el sistema de refrigeración con refrigerante, lo que no es posible sin equipo especial. Es necesario asegurar el mantenimiento periódico con especialista de servicio para la tecnología de refrigeración. En caso de fallo del enfriador, el sistema de refrigeración completo se desconecta para reparaciones que ocasionen la pérdida de funcionamiento de la cervecería. Por lo tanto, es aconsejable equipe la cervecería con por lo menos dos sistemas de refrigeración independientes que se apoyan entre sí.

A good and inexpensive solution of described disadvantages is the backup of cooling by alternative cooling system, consisting of independent liquid cooling units with integrated condenser. This modular solution is used in our microbreweries BREWORX MODULO.

 

Parámetros técnicos y lista de precios de los refrigeradores líquidos con un condensador separado:

Condensing unit assembly with a plate exchanger cooperates with a liquid coolant storage tank or independent cooling unit WCU or with independent cooling unit with heat water storage tank WCU-HWT.

 

 

Ofrecemos estos enfriadores de agua / glicol divididos:

  • GCU-25: Unidad de refrigeración externa 2.3-4.5 kW (para sistemas de refrigeración divididos)GCU-25: Unidad de refrigeración externa 2.3-4.5 kW (para sistemas de refrigeración divididos)
    The cooling condenser unit intended for the cooling of the water (usually with glycol solution) in the industrial cooling water tank (ICWT - industrial cooling water tank is not included in this set and it must be purchased individually according to requirements of the customer). The iced water is then used to cooling of the beverage production tanks like fermenters or beer storage tanks and also to cooling other devices in the brewery. This equipment uses a special technical coolant intended to chilling systems that has to be filled and pressurized into the primary circuit only by qualified person. This… Lee mas "
  • GCU-40: Unidad de refrigeración externa 5.6-10.9 kW (para sistemas de refrigeración divididos)GCU-40: Unidad de refrigeración externa 5.6-10.9 kW (para sistemas de refrigeración divididos)
    The cooling condenser unit intended for the cooling of the water (usually with glycol solution) in the industrial cooling water tank (ICWT - industrial cooling water tank is not included in this set and it must be purchased individually according to requirements of the customer). The iced water is then used to cooling of the beverage production tanks like fermenters or beer storage tanks and also to cooling other devices in the brewery. This equipment uses a special technical coolant intended to chilling systems that has to be filled and pressurized into the primary circuit only by qualified person. This… Lee mas "
  • GCU-64: Unidad de refrigeración externa 9.9-19.4 kW (para sistemas de refrigeración divididos)GCU-64: Unidad de refrigeración externa 9.9-19.4 kW (para sistemas de refrigeración divididos)
    The cooling condenser unit intended for the cooling of the water (usually with glycol solution) in the industrial cooling water tank (ICWT - industrial cooling water tank is not included in this set and it must be purchased individually according to requirements of the customer). The iced water is then used to cooling of the beverage production tanks like fermenters or beer storage tanks and also to cooling other devices in the brewery. This equipment uses a special technical coolant intended to chilling systems that has to be filled and pressurized into the primary circuit only by qualified person. This… Lee mas "
  • GCU-80: Unidad de refrigeración externa 11.9-23.3 kW (para sistemas de refrigeración divididos)GCU-80: Unidad de refrigeración externa 11.9-23.3 kW (para sistemas de refrigeración divididos)
    The cooling condenser unit intended for the cooling of the water (usually with glycol solution) in the industrial cooling water tank (ICWT - industrial cooling water tank is not included in this set and it must be purchased individually according to requirements of the customer). The iced water is then used to cooling of the beverage production tanks like fermenters or beer storage tanks and also to cooling other devices in the brewery. This equipment uses a special technical coolant intended to chilling systems that has to be filled and pressurized into the primary circuit only by qualified person. This… Lee mas "
  • GCU-125: Unidad de refrigeración externa 17.9-35.0 kW (para sistemas de refrigeración divididos)GCU-125: Unidad de refrigeración externa 17.9-35.0 kW (para sistemas de refrigeración divididos)
    The cooling condenser unit intended for the cooling of the water (usually with glycol solution) in the industrial cooling water tank (ICWT - industrial cooling water tank is not included in this set and it must be purchased individually according to requirements of the customer). The iced water is then used to cooling of the beverage production tanks like fermenters or beer storage tanks and also to cooling other devices in the brewery. This equipment uses a special technical coolant intended to chilling systems that has to be filled and pressurized into the primary circuit only by qualified person. This… Lee mas "
Recuperador de feeds RSS de WordPress por Tema Mason

 

>> Quiero recibir una oferta por este componente <

>> Volver a sistemas de refrigeración para cervecerías <

keyboard_arrow_up