Draft beer valve for filling of the PET bottles
Fill beer into a bottles for your customer directly in the bar
For the smallest microbreweries is usualy not worth bottling beer to glass bottles, because filling lines have large requirements for space, hygiene regulations, operator and handling with glass.
The simplest alternative is filling beer into PET bottles directly from the draft beer tower with special valves for filling PET bottles. To operate the filling valve is possible to use the same person who is working in the bar. Manipulation with the PET bottles is very easy. PET bottles are not necessary to wash or sanitize before filling, if they are stored in accordance with manufacturer’s recommendations.
Bartender during free moments is filling PET bottles of beer right at the bar and filled bottles are stored in fridge right behind the bar. Customers can buy so ready bottled beer from the bartender, waiter or at the reception.
Bartender can also fill PET bottles in front of the customer. Draft beer filled in to a bottle in front of a customer will give the drink label of freshness, which customer appreciate at most. This method of selling goes without any storage space for filled bottles.
Filling beer into PET bottles in simple hand filler
Filling machines for PET bottles usually consist of one or more filling cocks for filling beer into one or more PET bottles at one time.
After worker unpacks empty bottles from the packaging, puts the bottle on filling tap, starts filling procedure and then takes full bottles closed with lids and stores them in selling boxes.
All parts and fasteners are made from chrome-plated brass and stainless steel. This will increase resistance of the system’s wear and ensure maximum operating reliability (while ensuring regular cleaning procedures).
Price: 177 €
BFM-02 : Manual valve for filling beverages into PET bottles. Fill the beer into PET bottles directly in the bar, front of your customer. For the smallest breweries. The simplest solution for filling of beverages into bottles is to fill
Price: 387 €
BFM-01 Manual valve for filling beverages into PET bottles. For the smallest breweries. The simplest solution for filling of beverages into bottles is to fill the beer into PET bottles directly from a special valve on a dispensing beer tower