Operate your own original Czech Micro Brewery

BFM-02 Draft beer valve for filling of the PET bottles

BFM-02 Draft beer valve for filling of the PET bottles

Fill beer into a bottles for your customer directly in the bar

Fraft beer valve for filling of the bottlesplnicka-pet-vycepni-002For the smallest microbreweries is usualy not worth bottling beer to glass bottles, because filling lines have large requirements for space, hygiene regulations, operator and handling with glass.

The simplest alternative is filling beer into PET bottles directly from the draft beer tower with special valves for filling PET bottles. To operate the filling valve is possible to use the same person who is working in the bar. Manipulation with the PET bottles is very easy. PET bottles are not necessary to wash or sanitize before filling, if they are stored in accordance with manufacturer’s recommendations.

Bartender during free moments is filling PET bottles of beer right at the bar and filled bottles are stored in fridge right behind the bar. Customers can buy so ready bottled beer from the bartender, waiter or at the reception.

Bartender can also fill PET bottles in front of the customer. Draft beer filled in to a bottle in front of a customer will give the drink label of freshness, which customer appreciate at most. This method of selling goes without any storage space for filled bottles.

 

 

 

 

Technical parameters and price list of the simple fillers :

 

(PLEASE WAIT – loading of the tab with parameters and pricelist may take a few seconds … )


 

>> I want to receive an offer for this component <<

 

If you enjoyed this post, please consider subscribing to the RSS feed to have future articles delivered to your feed reader.