• Home
  • E-SHOP
  • Blog
  • References
  • Newsletter
  • Catalog
  • Česky

CCTM-A2 Offer for the modular tanks CCTM in configuration A2

The CCTM modular cylindrical-conical tank consists of the basic tank (BT) and the modular tank accessories (MTA). Assembling tanks to many desired configurations is possible due to the big number of combinations of expansion accessory that is combined and mounted on the basic tank. It is thus possible to equip the modular tank optimal configuration for the desired part of the beverage production process.


Description of the modular cylindrical-conical tanks CCTM in configuration A2

A2 configuration is a simplified set of the CCTM tank that allows all phases production of beer, cider, wine, must, lemonades, including carbonated isobaric beverages.

A main part of the A2 set is a basic tank. The basic tank is a pressure vessel, made of stainless steel AISI 304 with respect to the food industry policy , with glossy inner surface (surface roughness 2B/2J – choice of the customer), with cylindrical upper part, conical lower part and domical upper bottom.

The modular cylindrical-conical tanks in this configuration are produce in these versions:

According to the maximal overpressure :

  • LP – Low pressure tank – maximal reachable overpressure 0.5 bar – usefull only for the fermenting process (beer, cider, wine) and production of low-pressure beverages (must, wine, juices)
  • HP – High pressure tank – maximal reachable overpressure 3.0 bar – usefull for fermentation, maturation, aeration/ carbonation/… , flotation, final treatment and tapping of both carbonated and non-carbonated beverages (beer, cider, sparkling wines, lemonades, …)

According to the quality and surface treatment :

  • SQ – standard quality – inner sheets of the cylindrical part SB Ra
  • HQ – high quality – inner sheets and weldings polished SJ Ra
  • TQ- top quality – inner sheets and weldings polished SJ Ra
Differences between A1 and A2 configurations :

The tank with A2 configuration includes RO1 and DO1 arm-pipes. These additional pipes allow greater comfort in connection work when hoses have to be joined with the tank and when yeast has to be collected to the yeast storege tank. But there is cerntainly possible  to disconnect the RO1, RO2 pipes for example to its cleaning. Connecting and disconnecting of the pipes may be done always when the tank is full – it is recommended before filling and draining the tank for ensuring absolutelly clean pipes before their contact with the beverage product.

 

Equipment of the tank allows you to set required overpressure in the tank using the relief valve and to read current pressure on the manometer. The fermentation process is indicated due bubbles that go throuhg water in the cap of the RV1 relief valve set.

The tank includes a fixed or rotational SB1 spray ball and all pipes and valves that are needes for easy cleaning and sanitizing of the tank, ideally with use the CIP station.

SV1 sample valve allows a sampling collection. There is possible to add to the tank also a carbonation equipment, dry hopping equipment or a flotation machine for puring of fruit must.

LIS fill level indicator is not included in this set because this accessory is not needed when the tank is used only for fermentation and maturation processes – the tank is usually empty or full. User of tank may not pay unnecessary care to cleaning and sanitizing of the level indicator.

Filling and draining hoses have to be connected on the end of the RO1 and DO1 arm-pipes.  We recommend to disconnect and clean both these pipes before each use for reaching an absolute steriility. Position of RO2, DO2 flap-valves closest to the tank prevents unwanted rotting yeast in uninsulated arms. Similarly yeast cannot rot inside uninsulated pipes of the file level indicator because LIS fill level indicator is not included in this A2 configuration.

These two things very eliminate worry about the problem of rotting yeast, which are within the sight glass exposed to higher temperatures and they can negatively affect the quality of the product inside the tank.

Thanks to its modular design it is always possible to add the level indicator to the tank and change this configuration to other one – only when the tank is empty.

The tank may be reconfigured to other configuration anytime.

Attention: The internal data of table “12” is corrupted!

Offer for the CCTM modular cylindrical-conical tanks in recommended configuration A2 :


other variants of CCTM tanks in the A2 configuration


Price list of CCTM components :

  • CCTM-BT : Offer for basic tanks of the CCTM system
  • CCTM-MTA : Offer for accessories and equipment CCTM

Offers for the CCTM modular tanks in all recommended configurations :

  • CCTM-A1 : Offer for the modular tanks CCTM in configuration A1
  • CCTM-A2 : Offer for the modular tanks CCTM in configuration A2
  • CCTM-A3 : Offer for the modular tanks CCTM in configuration A3
  • CCTM-B1 : Offer for the modular tanks CCTM in configuration B1
  • CCTM-B2 : Offer for the modular tanks CCTM in configuration B2

General informations about CCTM modular tank system


Attention: The internal data of table “10” is corrupted!

shares